Easier Than It Seems: How To Install Artificial Grass

A simple step-by-step guide for anyone who thinks they need to be a craftsman to install artificial grass. Read on to see otherwise!
How to install artificial grass

The second problem in a row after choosing artificial grass is its installation. Placing artificial grass can be intimidating for many, but it’s much easier than it sounds. In this article, we will prove to you that there is nothing difficult in this and will help you avoid mistakes.

Artificial grass has several advantages, such as density, realism, evergreen, and resistance to yellowing in the sun.

After reading this article, you will understand that another plus of artificial grass is the ease of installation.

How to install artificial grass?

Step 1: Measure your area

Before installing artificial grass, measure the length of your plot and its width. It will help you to cut the desired size from the roll.

❗️ Important
Leave a small margin on edges (about 3-4 inches) so that the lawn accurately entirely covers the required area.

Step 2: Remove the old grass

 How to install artificial grass

If you have had real grass before, then dig up the area and rake up the old grass. If you want to replace an artificial one, just roll it up.

Step 3: Prepare the area

This step has 2 stages:

  • After the grass is removed, dig down about 4 inches. This will promote better water absorption and drainage. 
  • Add a layer of crushed gravel on top of the ground and compact it well.
💡 Tip
You can use a manual or motorized temper for better results.

Step 4: Prepare new grass

After the site is ready, you should prepare the new grass. Roll out the artificial grass and give it some time to flatten out after rolling.

Step 5: Start of the installation

Lay down the grass and line the edges of the artificial grass. If you are using several pieces of grass, try to set them immediately as close to each other as possible.

Step 6: Fix the grass

Tap nails in the ground about every 1 to 2 feet and along the joints.

How to install artificial grass
You can also use a transparent fishing line and thread to sew the seams.

Step 7: Remove excess grass

Use a utility knife to cut off excess grass.

Step 8: Compact the grass

Use a seed distributor (hopper) to fill in the sand.

To measure how much a hopper you need, use this statement:

💯 Rule
You will need about 2 pounds of sand per 1 sq. ft of grass.

Step 9: Give your grass a natural look

How to install artificial grass

Use a stiff brush to spread the sand between the pile of the artificial grass. It will help make your new lawn completely realistic.

Step 10: Enjoy

Praise yourself for the work done and enjoy the result!


People love to complicate things without even understanding. With the help of this article, you will find that installing a lawn is as easy as shelling pears. We have prepared a step-by-step guide for you, where we talked about the tips and tricks of installing artificial grass. Save your time and money by not calling the master and make your dream lawn with your own hands!


⌛️ How to prepare the ground for artificial grass?

Simply put, you need:

  1. Remove the old grass in the area;
  2. Dig up about 3-4 inches of ground for better drainage;
  3. Level the ground and remove any unevenness.

A more detailed description of the steps in our article.

🌀 Can I lay artificial grass on soil?

No. The artificial grass will not lay on top of loose soil or old grass. We recommend removing the old grass and plowing a little of the top of the ground before installing.

♻️ Can I install artificial grass myself?

Yes! For many, doing it yourself is much easier than hiring someone. In our article, we explain in detail how to do this.

❌ How deep need to dig the ground for the artificial grass?

On average, you need to dig about 3-4 inches. This will promote better water absorption and drainage.

Leave a Reply

Your email address will not be published.

Related Posts
?1Do NOT follow this link or you will be banned from the site!